Datasheet
TPD12S016
www.ti.com
SLLSE96D –SEPTEMBER 2011–REVISED DECEMBER 2012
ABSOLUTE MAXIMUM RATINGS
(1)(2)
over operating free-air temperature range (unless otherwise noted)
VALUE
UNIT
MIN MAX
V
CCA
Supply voltage range –0.3 4.0 V
V
CC5V
Supply voltage range –0.3 6.0 V
SCL_A, SDA_A, CEC_A –0.3 4.0
SCL_B, SDA_B, CEC_B –0.3 6.0
V
I
Input voltage range
(2)
V
CT_HPD, LS_OE –0.3 4.0
D, CLK –0.3 6.0
SCL_A, SDA_A, CEC_A, CT_HPD, LS_OE –0.3 4.0
Voltage range applied to any output in
V
O
V
the high-impedance or power-off state
(2)
SCL_B, SDA_B, CEC_B –0.3 6.0
SCL_A, SDA_A, CEC_A, CT_HPD, LS_OE –0.3 VCCA + 0.5
Voltage range applied to any output in
V
O
V
the high or low state
(2)(3)
SCL_B, SDA_B, CEC_B –0.3 VCCB + 0.5
I
IK
Input clamp current VI < 0 –50 mA
I
OK
Output clamp current VO < 0 –50 mA
Continuous current through V
CCB
, or
±100 mA
GND
T
stg
Storage temperature range –65 150 °C
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those specified is not implied.
(2) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
(3) The package thermal impedance is calculated in accordance with JESD 51-7.
RECOMMENDED OPERATING CONDITIONS
over recommended operating free-air temperature range (unless otherwise noted)
MIN TYP MAX UNIT
V
CCA
Supply voltage 1.1 3.6 V
V
CC5V
Supply voltage 4.5 5.5 V
SCL_A, SDA_A VCCA =1.1V to 3.6 V 0.7×V
CCA
V
CCA
V
CEC_A VCCA =1.1V to 3.6 V 0.7×V
CCA
V
CCA
V
CT__HPD, LS_OE VCCA =1.1V to 3.6 V 1.0 V
CCA
V
V
IH
High-level input voltage
SCL_B, SDA_B 5V_OUT = 5.0 V 0.7×5V_OUT 5V_OUT V
CEC_B 5V_OUT = 5.0 V 0.7×V
3P3
(1)
V
3P3
HPD_B 5V_OUT = 5.0 V 2.0 5V_OUT
SCL_A, SDA_A VCCA =1.1V to 3.6 V –0.5 0.082×V
CCA
V
CEC_A VCCA =1.1V to 3.6 V –0.5 0.082×V
CCA
V
CT_HPD, LS_OE VCCA =1.1V to 3.6 V –0.5 0.4 V
V
IL
Low-level input voltage
SCL_B, SDA_B 5V_OUT = 5.0 V –0.5 0.3×5V_OUT V
CEC_B 5V_OUT = 5.0 V –0.5 0.3×V
3P3
V
HPD_B 5V_OUT = 5.0 V 0 0.8 V
(contention) Low-level
V
ILC
SCL_A, SDA_A, CEC_A VCCA =1.1V to 3.6 V –0.5 0.065×V
CCA
V
input voltage
Delta between V
OL
and
V
OL
- V
ILC
SCL_A, SDA_A, CEC_A VCCA =1.1V to 3.6 V 0.1×V
CCA
mV
V
ILC
T
A
Operating free-air temperature –40 85 °C
(1) The V3P3 is an internal 3.3V power supply node. The V3P3 is generated from the 5V supply pin through the on-chip LDO.
Copyright © 2011–2012, Texas Instruments Incorporated Submit Documentation Feedback 5
Product Folder Links :TPD12S016