- Audio Power Amplifier Evaluation Module TPA6110A2 MSOP Audio Power Amplifier Evaluation Module User's Manual

Features
1-2
Introduction
1.1 Features
The TI TPA6110A2 MSOP audio amplifier evaluation module and the TI
plug-n-play audio amplifier evaluation platform include the following features:
 TPA6110A2 MSOP Stereo Audio Power Amplifier Evaluation Module
 Dual channel, single-ended operation
 150-mW output power into 8 Ω at 5 V
 2.5-V to 5.5-V operation
 Very low distortion:
 THD+N is less than 0.01% at 1 kHz and less than 0.03% from 20
Hz to 20 kHz into 10-kΩ loads
 Less than 0.02% at 1 kHz and less than 0.4% from 20 Hz to 20 kHz
into 32-Ω loads
 Less than 0.05% at 1 kHz and less than 0.8% from 20 Hz to 20 kHz
into 8-Ω loads
 Extremely low current consumption in shutdown mode
 Internal thermal and short-circuit protection
 Internal pop reduction circuitry
 Quick and Easy Configuration With the TI Plug-N-Play Audio Amplifier
Evaluation Platform
 Evaluation module is designed to simply plug into the platform,
automatically making all signal, control, and power connections
 Platform provides flexible power options
 Jumpers on the platform select power and module control options
 Switches on the platform route signals
 Platform provides quick and easy audio input and output connections
 Platform Power Options
 Onboard 9-V battery
 External 5-V–15-V (V
CC
) supply inputs
 External regulated V
DD
supply input
 Socket for on-board 5-V V
DD
voltage regulator EVM
 Onboard overvoltage and reverse polarity power protection
 Platform Audio Input and Output Connections
 Left and right RCA phono jack inputs
 Miniature stereo phone jack input
 Left and right RCA phono jack outputs
 Left and right compression speaker terminal outputs
 Miniature stereo headphone jack output