Datasheet

www.ti.com Reference
2.2 Power Up
1. Verify the correct connections as described in Sections 2.1.1 and 2.1.2.
2. Verify the voltage setting of the power supply is between 2.5 V and 5.5 V, and turn on the power
supply. Proper operation of the EVM begins.
3. Adjust the audio signal source as needed.
3 Reference
This section includes the EVM PCB layout reference, schematic, and parts list.
3.1 TPA2035D1EVM PCB Layers
Figure 2. Top Layer
3
SLOU237A–August 2008–Revised December 2009 TPA2035D1 Audio Power Amplifier Evaluation Module
Submit Documentation Feedback
Copyright © 2008–2009, Texas Instruments Incorporated