Datasheet

ABSOLUTE MAXIMUM RATINGS
(1)
DISSIPATION RATINGS TABLE
(1)
TPA2016D2
www.ti.com ........................................................................................................................................................ SLOS524D – JUNE 2008 – REVISED AUGUST 2009
PIN FUNCTIONS
PIN I/O/P DESCRIPTION
NAME WCSP RTJ
INR+ A2 15 I Right channel positive audio input
INR – A1 14 I Right channel negative audio input
INL+ A3 1 I Left channel positive audio input
INL – A4 2 I Left channel negative audio input
SDZ C2 18 I Shutdown terminal (active low)
SDA B3 19 I/O I
2
C data interface
SCL B2 17 I I
2
C clock interface
OUTR+ D1 10 O Right channel positive differential output
OUTR – D2 9 O Right channel negative differential output
OUTL+ D4 6 O Left channel positive differential output
OUTL – D3 7 O Left channel negative differential output
AVDD B1 13 P Analog supply (must be the same as PVDDR and PVDDL)
AGND B4 3 P Analog ground (all GND pins need to be connected)
PVDDR C1 11, 12 P Right channel power supply (must be the same as AVDD and PVDDL)
PGND C3 8 P Power ground (all GND pins need to be connected)
PVDDL C4 4, 5 P Left channel power supply (must be the same as AVDD and PVDDR)
16, 20 Not connected
over operating free-air temperature range (unless otherwise noted).
VALUE / UNIT
V
DD
Supply voltage AVDD, PVDDR, PVDDL – 0.3 V to 6 V
SDZ, INR+, INR – , INL+, INL – – 0.3 V to V
DD
+0.3 V
Input voltage
SDA, SCL – 0.3 V to 6 V
Continuous total power dissipation See Dissipation Ratings Table
T
A
Operating free-air temperature range – 40 ° C to +85 ° C
T
J
Operating junction temperature range – 40 ° C to 150 ° C
T
stg
Storage temperature range – 65 ° C to 150 ° C
Human Body Model (HBM) 2 KV
ESD Electro-Static Discharge Tolerance, all pins
Charged Device Model (CDM) 500 V
R
LOAD
Minimum load resistance 3.2 Ω
(1) Stresses beyond those listed under " absolute maximum ratings " may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under " recommended operating
conditions " is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
PACKAGE T
A
≤ 25 ° C DERATING FACTOR T
A
= 70 ° C T
A
= 85 ° C
16-ball WCSP 1.25 W 10 mW/ ° C 0.8 W 0.65 W
20 – pin QFN 5.2 W 41.6 mW/ ° C 3.12 W 2.7 W
(1) Dissipations ratings are for a 2-side, 2-plane PCB.
Copyright © 2008 – 2009, Texas Instruments Incorporated 3
Product Folder Link(s): TPA2016D2