Datasheet

www.ti.com
ABSOLUTE MAXIMUM RATINGS
DISSIPATION RATING TABLE
RECOMMENDED OPERATING CONDITIONS
TPA1517
SLOS162D MARCH 1997 REVISED FEBRUARY 2007
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Terminal Functions
TERMINAL
I/O DESCRIPTION
DWP NE
NAME
NO. NO.
IN1 2 1 I IN1 is the audio input for channel 1.
SGND 4 2 I SGND is the input signal ground reference.
SVRR 5 3 SVRR is the midrail bypass.
OUT1 7, 8 4 O OUT1 is the audio output for channel 1.
PGND 9, 12 5 PGND is the power ground reference.
OUT2 13, 14 6 O OUT2 is the audio output for channel 2.
V
CC
16 7 I V
CC
is the supply voltage input.
M/SB is the mute/standby mode enable. When held at less than 2 V, this signal enables the
M/SB 17 8 I TPA1517 for standby operation. When held between 3.5 V and 8.2 V, this signal enables the
TPA1517 for mute operation. When held above 9.3 V, the TPA1517 operates normally.
IN2 19 9 I IN2 in the audio input for channel 2.
1, 10, GND/HS are the ground and heatsink connections. All GND/HS terminals are connected directly to
GND/HS 10-20
11, 20 the mount pad for thermal-enhanced operation.
over operating free-air temperature range (unless otherwise noted)
UNIT
V
CC
Supply voltage 22 V
V
I
Input voltage (IN1, IN2) 22 V
Internally limited
Continuous total power dissipation
(See Dissipation Rating Table)
T
A
Operating free-air temperature range -40 ° C to 85 ° C
T
J
Operating junction temperature range -40 ° C to 150 ° C
T
stg
Storage temperature range -65 ° C to 85 ° C
PACKAGE T
A
25 ° C DERATING FACTOR T
A
= 70 ° C T
A
= 85 ° C
DWP
(1)
2.94 W 23.5 mW/ ° C 1.88 W 1.53 W
NE
(1)
2.85 W 22.8 mW/ ° C 1.82 W 1.48 W
(1) See the Texas Instruments document, PowerPAD Thermally Enhanced Package Application Report (literature number SLMA002), for
more information on the PowerPAD package. The thermal data was measured on a PCB layout based on the information in the section
entitled Texas Instruments Recommended Board for PowerPAD on page 33 of the before mentioned document.
MIN NOM MAX UNIT
V
CC
Supply voltage 9.5 18 V
T
A
Operating free-air temperature -40 85 ° C
2
Submit Documentation Feedback