- TMS370 Microcontroller/Gang Programmer User's Guide

Properly Installing the Programmer Hardware
1-10
Introduction and Installation
2) Connect port A of the XDS to the PC by using the cable supplied with the
XDS.
3) Ensure that the switches on the XDS Communications board are set as
in Table 1–1.
Table 1–1. XDS Memory Expansion/Communications Board Switch Settings
Switch No. S1 S2 S3 S4
1 Off Off Off Off
2 Off On Off Off
3 Off Off Off Off
4 Off On On Off
5 On Off On On
6 Off Off On On
7 On On On Off