Serial RapidIO (SRIO) User's Guide

www.ti.com
SRIO Functional Description
Figure 35. BLK0_EN_STAT (Address 003Ch)
31 1 0
Reserved EN_STAT
R-0 R-1
LEGEND: R = Read, W = Write, - n = Value after reset
Figure 36. BLK1_EN (Address 0040h)
31 1 0
Reserved EN
R-0 R/W-1
LEGEND: R = Read, W = Write, - n = Value after reset
Figure 37. BLK1_EN_STAT (Address 0044h)
31 1 0
Reserved EN_STAT
R-0 R-1
LEGEND: R = Read, W = Write, - n = Value after reset
•
•
•
Figure 38. BLK8_EN (Address 0078h)
31 1 0
Reserved EN
R-0 R/W-1
LEGEND: R = Read, W = Write, - n = Value after reset
Figure 39. BLK8_EN_STAT (Address 007Ch)
31 1 0
Reserved EN_STAT
R-0 R-1
LEGEND: R = Read, W = Write, - n = Value after reset
Table 28. Block Enable and Block Enable Status Field Descriptions
Register(Bit) Field Valu Description
e
BLK n_EN(31–1) Reserved 0 These read-only bits return 0s when read.
BLK n_EN(0) EN Block n enable
0 Logical block n is to be reset with its clock off.
1 Logical block n is to be enabled with its clock running.
BLK n_EN_STAT(31–1) Reserved 0 These read-only bits return 0s when read.
BLK n_EN_STAT(0) EN_STAT Block n enable status
0 Logical block n is reset with its clock off.
1 Logical block n is enabled with its clock running.
SPRUE13A – September 2006 Serial RapidIO (SRIO) 73
Submit Documentation Feedback