Serial RapidIO (SRIO) User's Guide

SRIO Registers
at port n requesting interrupt with INTERRUPT_REQ field 159
CRC errors
rate counting enable field 222
bad CRC in control symbol at port n
status field 220
rate counting enable field 221
bad CRC in control symbol at port n
status field 219
rate counting enable field 221
bad CRC in packet at port n
status field 219
rate counting enable field 222
detect 4 reset control symbols at port 232
status field 220
detect multicast-event control symbol at port 231
recovery suppression support field 186
enable interrupt if 4 reset control symbols received at
CRC in control symbol 24
port 232
enable interrupt if multicast-event control symbol CRC in packet 23
received at port 231
credit for outbound packets 75
force insertion of control symbol in outbound packet
CRF_SUPPORT field of PE_FEAT 186
240
critical error interrupt to the CPU 85
initiate self reset interrupt if 4 link-request control
critical request flow support field 186
symbols accepted 231
CS_EMB field of SPn_CS_TX 240
introduction 24
CTRL_CAPT 217
link maintenance command field for port n 240
cut-through mode option for port n 236
link maintenance request control symbol generation
register 200
D
packet-not-accepted control symbol at port n
DATA_MESS field of DEST_OP 189
rate counting enable field 221
DATA_MESS field of SRC_OP 188
status field 220
data flow diagram for Load/Store module 39
parameter0 field for port n 240
data flow overview for SRIO peripheral 21
parameter1 field for port n 240
data message support for destination device 189
port multicast-event control symbol request field 239
data message support for source device 188
stype0 field for port n 240
data rate select field for SERDES receiver 126
stype1 field for port n 240
DEBUG field of SPn_CTL_INDEP 236
transmit request field for port n 240 debug mode selection for port n 237
unexpected ackID in control symbol at port n
debug packet field for port n 237
rate counting enable field 221
decode registers for interrupt conditions 150
decoding interrupt condition source 97
status field 219
unexpected acknowledge control symbol at port n
decrement rate for port error rate counter 228
rate counting enable field 222 de-emphasis field 128
DE field of SERDES_CFGTXn_CNTL 128
status field 220
unexpected control symbol at port n
delimiting of control symbols 24
delineation error at port n
rate counting enable field 222
status field 220
rate counting enable field 222
CORRUPT_CNTL_SYM_EN field of SPn_RATE_EN
status field 220
221
dest_id field of TX buffer descriptor 52
CORRUPT_CNTL_SYM field of SPn_ERR_DET 219
DEST_OP 189
corrupt control symbol at port n
DESTID field for LSUn 159
rate counting enable field 221
DESTID field of ID_CAPT 216
status field 219
DESTID field of LSUn_REG4 159
corrupt packet at port n
destination IDs
rate counting enable field 222
destination ID associated with logical/transport error
status field 220
216
count down value for interrupt rate control 154
device ID for port-write target 218
CPPI 43
disable base ID match requirement field for ports 231
boundary diagram 50
for control flows
rules for data traffic 43
description 181
RX operation 44
introduction 66
TX operation 51
for LSU transmission 159
CPU
size select field for flow control 181
in Load/Store module data flow diagram 39
destination operations CAR 189
interrupts 85
DEV_ID 182
SPRUE13A – September 2006 Index 243
Submit Documentation Feedback