Serial RapidIO (SRIO) User's Guide

www.ti.com
SRIO Registers
Table 161. Port Error Rate Enable CSR n (SP n_RATE_EN) Field Descriptions (continued)
Bit Field Value Description
19 PKT_UNEXPECTED_ACKID_EN Rate counting enable for packets with unexpected ackIDs
0 Disable error rate counting of packets with
unexpected/out-of-sequence ackIDs
1 Enable error rate counting of packets with
unexpected/out-of-sequence ackIDs.
18 RCVED_PKT_WITH_BAD_CRC_EN Rate counting enable for packets with bad CRC
0 Disable error rate counting of packets with a bad CRC values.
1 Enable error rate counting of packets with a bad CRC values.
17 RCVED_PKT_OVER_276B_EN Rate counting enable for oversize packets
0 Disable error rate counting of packets that exceed the maximum
allowed size.
1 Enable error rate counting of packets that exceed the maximum
allowed size.
16–6 Reserved 0 These read-only bits return 0s when read.
5 NON_OUTSTANDING_ACKID_EN Rate counting enable for non-outstanding ackIDs
0 Disable error rate counting of link-responses received with an
ackID that is not outstanding.
1 Enable error rate counting of link-responses received with an
ackID that is not outstanding.
4 PROTOCOL_ERROR_EN Rate counting enable for protocol errors
0 Disable error rate counting of protocol errors.
1 Enable error rate counting of protocol errors.
3 Reserved 0 This read-only bit returns 0 when read.
2 DELINEATION_ERROR_EN Rate counting enable for delineation errors
0 Disable error rate counting of delineation errors.
1 Enable error rate counting of delineation errors.
1 UNSOLICITED_ACK_CNTL_SYM_EN Rate counting enable for unsolicited acknowledge control symbols
0 Disable error rate counting of unsolicited acknowledge control
symbols.
1 Enable error rate counting of unsolicited acknowledge control
symbols.
0 LINK_TIMEOUT_EN Rate counting enable for link time-out errors
0 Disable error rate counting of link timeout errors.
1 Enable error rate counting of link timeout errors.
Serial RapidIO (SRIO)222 SPRUE13A – September 2006
Submit Documentation Feedback