Serial RapidIO (SRIO) User's Guide

www.ti.com
5.13 SERDES Receive Channel Configuration Register n (SERDES_CFGRX n_CNTL)
SRIO Registers
There are four of these registers, to support four ports (see ). The general form for a SERDES receive
channel configuration register is summarized by Figure 74 and Table 57 . See Section 2.3.2.2 for a
complete explanation of the programming of these registers.
Table 56. SERDES_CFGRX n_CNTL Registers and the Associated Ports
Register Address Offset Associated Port
SERDES_CFGRX0_CNTL 0100h Port 0
SERDES_CFGRX1_CNTL 0104h Port 1
SERDES_CFGRX2_CNTL 0108h Port 2 (TMS320TCI6482 Only)
SERDES_CFGRX3_CNTL 010Ch Port 3 (TMS320TCI6482 Only)
Figure 74. SERDES Receive Channel Configuration Register n (SERDES_CFGRX n_CNTL)
31 26 25 24 23 22 19 18 16
Reserved
Reserved — EQ CDR
(write 0s)
R-0 R/W-0 R-0 R/W-0 R/W-0
15 14 13 12 11 10 8 7 6 5 4 2 1 0
TERM —
LOS ALIGN — INVPAIR RATE BUSWIDTH ENRX
(write 001b) (write 0)
R/W-0 R/W-0 R-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
LEGEND: R/W = Read/Write; R = Read only; -n = Value after reset
Table 57. SERDES Receive Channel Configuration Register n (SERDES_CFGRX n_CNTL) Field
Descriptions
Bit Field Value Description
31–26 Reserved 000000b These read-only bits return 0s when read.
25–24 Reserved 00b Always write 0s to these reserved bits.
23 Reserved 0 This read-only bit returns 0 when read.
22–19 EQ 0000b–1111b Equalizer. Enables and configures the adaptive equalizer to compensate for loss
in the transmission media. For the selectable values, see Table 58 .
18–16 CDR Clock/data recovery. Configures the clock/data recovery algorithm.
000b First order. Phase offset tracking up to ± 488 ppm.
001b Second order. Highest precision frequency offset matching but poorest response
to changes in frequency offset, and longest lock time. Suitable for use in systems
with fixed frequency offset.
010b Second order. Medium precision frequency offset matching, frequency offset
change response, and lock time.
011b Second order. Best response to changes in frequency offset and fastest lock time,
but lowest precision frequency offset matching. Suitable for use in systems with
spread spectrum clocking.
100b First order with fast lock. Phase offset tracking up to ± 1953 ppm in the presence of
..10101010.. training pattern, and ± 448 ppm otherwise.
101b Second order with fast lock. As per setting 001, but with improved response to
changes in frequency offset when not close to lock.
110b Second order with fast lock. As per setting 010, but with improved response to
changes in frequency offset when not close to lock.
111b Second order with fast lock. As per setting 011, but with improved response to
changes in frequency offset when not close to lock.
SPRUE13A – September 2006 Serial RapidIO (SRIO) 125
Submit Documentation Feedback