Serial RapidIO (SRIO) User's Guide

www.ti.com
5.10 RapidIO DEVICEID2 Register (DEVICEID_REG2)
SRIO Registers
The RapidIO DEVICEID2 register (DEVICEID_REG2 is shown in Figure 71 and described in Table 51 . For
additional programming information, see Section 2.3.15.1 and Section 2.3.15.3 .
Figure 71. RapidIO DEVICEID2 Register (DEVICEID_REG2) (Offset 0x0084)
31 24 23 16
Reserved 8BNODEID
R-00h R/W-FFh
15 0
16BNODEID
R-FFFFh
LEGEND: R/W = Read/Write; R = Read only; - n = Value after reset
Table 51. RapidIO DEVICEID2 Register (DEVICEID_REG2) Field Descriptions
Bit Field Value Description
31–24 Reserved 0 Reserved
23–16 8BNODEID 00h–FFh This is a secondary supported DeviceID checked against an incoming packet's DestID
field. Typically used for Multi-cast support.
15–0 16BNODEID 0000h–FFFFh This is a secondary supported DeviceID checked against an incoming packet's DestID
field. Typically used for Multi-cast support.
Serial RapidIO (SRIO)122 SPRUE13A – September 2006
Submit Documentation Feedback