Network Card User Manual

MDIO Registers www.ti.com
4.11 MDIO User Command Complete Interrupt Mask Clear Register
(USERINTMASKCLEAR)
The MDIO user command complete interrupt mask clear register (USERINTMASKCLEAR) is shown in
Figure 38 and described in Table 31.
Figure 38. MDIO User Command Complete Interrupt Mask Clear Register (USERINTMASKCLEAR)
31 16
Reserved
R-0
15 2 1 0
USERINT
Reserved
MASKCLEAR
R-0 R/WC-0
LEGEND: R = Read only; R/WC = Read/Write 1 to clear; -n = value after reset
Table 31. MDIO User Command Complete Interrupt Mask Clear Register (USERINTMASKCLEAR)
Field Descriptions
Bit Field Value Description
31-2 Reserved 0 Reserved
1-0 USERINTMASKCLEAR MDIO user command complete interrupt mask clear for USERINTMASKED[1:0]
respectively. Setting a bit to 1 will disable further user command complete interrupts for
that particular USERACCESS register. Writing a 0 to this register has no effect.
86
C6472/TCI6486 EMAC/MDIO SPRUEF8F–March 2006–Revised November 2010
Submit Documentation Feedback
Copyright © 2006–2010, Texas Instruments Incorporated