Manualshelf

Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsMicrocontrollers, Microprocessors & QuartzesEmbedded microcontroller LQFP 144 (20x20) 16-Bit 40 MHz I/O number 41
71727374757677787980
TMS320LF2407A, TMS320LF2406A, TMS320LF2403A, TMS320LF2402A
TMS320LC2406A, TMS320LC2404A, TMS320LC2403A, TMS320LC2402A
DSP CONTROLLERS
SPRS145L − JULY 2000 − REVISED SEPTEMBER 2007
75
POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251−1443
current consumption by power-supply pins over recommended operating free-air temperature
ranges during low-power modes at 40-MHz CLOCKOUT (TMS320LC2403A)
PARAMETER MODE TEST CONDITIONS MIN TYP MAX UNIT
I
DD
†
Operational Current
LPM0
Clock to all peripherals is enabled.
50 70 mA
I
CCA
ADC module current
LPM0
Clock to all peripherals is enabled.
No I/O pins are switching.
10 22 mA
I
DD
†
Operational Current
LPM1
Clock to all peripherals is disabled.
35 45 mA
I
CCA
ADC module current
LPM1
Clock to all peripherals is disabled.
No I/O pins are switching.
0 0 mA
I
†
Operational Current
−40°C to 85°C 20 200 µA
I
DD
†
Operational Current
LPM2
−40°C to 125°C 20 400 µA
I
CCA
ADC module current
LPM2
Clock to all peripherals is disabled.
Input clock is disabled.
‡
0 0 mA
†
I
DD
is the current flowing into the V
DD
, V
DDO
, and PLLV
CCA
pins.
‡
If a quartz crystal or ceramic resonator is used as the clock source, the LPM2 mode shuts down the internal oscillator.
current consumption by power-supply pins over recommended operating free-air temperature
ranges during low-power modes at 40-MHz CLOCKOUT (TMS320LC2402A)
PARAMETER MODE TEST CONDITIONS MIN TYP MAX UNIT
I
DD
†
Operational Current
LPM0
Clock to all peripherals is enabled.
40 60 mA
I
CCA
ADC module current
LPM0
Clock to all peripherals is enabled.
No I/O pins are switching.
10 22 mA
I
DD
†
Operational Current
LPM1
Clock to all peripherals is disabled.
35 45 mA
I
CCA
ADC module current
LPM1
Clock to all peripherals is disabled.
No I/O pins are switching.
0 0 mA
I
†
Operational Current
−40°C to 85°C 20 200 µA
I
DD
†
Operational Current
LPM2
−40°C to 125°C 20 400 µA
I
CCA
ADC module current
LPM2
Clock to all peripherals is disabled.
Input clock is disabled.
‡
0 0 mA
†
I
DD
is the current flowing into the V
DD
, V
DDO
, and PLLV
CCA
pins.
‡
If a quartz crystal or ceramic resonator is used as the clock source, the LPM2 mode shuts down the internal oscillator.