Datasheet

TMS320LF2407A, TMS320LF2406A, TMS320LF2403A, TMS320LF2402A
TMS320LC2406A, TMS320LC2404A, TMS320LC2403A, TMS320LC2402A
DSP CONTROLLERS
SPRS145L − JULY 2000 − REVISED SEPTEMBER 2007
71
POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251−1443
LF240xA AND LC240xA ELECTRICAL SPECIFICATIONS DATA
absolute maximum ratings over operating free-air temperature ranges (unless otherwise noted)
†
Supply voltage range, V
DD
, PLLV
CCA
, V
DDO
, and V
CCA
(see Note 1) − 0.3 V to 4.6 V. . . . . . . . . . . . . . . . . . .
V
CCP
range − 0.3 V to 5.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage range, V
IN
− 0.3 V to 4.6 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output voltage range, V
O
LF240xA − 0.3 V to 4.6 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output voltage range,V
O
LC240xA − 0.3 V to 4.6 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input clamp current, I
IK
(V
IN
< 0 or V
IN
> V
CC
) ± 20 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output clamp current, I
OK
(V
O
< 0 or V
O
> V
CC
) ± 20 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating free-air temperature ranges, T
A
: A version − 40°C to 85°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S version − 40°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Junction temperature range, T
J
(see Note 2) − 40°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, T
stg
(see Note 2) − 65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
†
Clamp current stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress
ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating
conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values are with respect to V
SS
.
2. Long−term high−temperature storage and/or extended use at maximum temperature conditions may result in a reduction of overall
device life. For additional information, see the IC Package Thermal Metrics Application Report (literature number SPRA953) and
the Reliability Data for TMS320LF24x and TMS320F281x Devices Application Report (literature number SPRA963).
recommended operating conditions
‡§
MIN NOM MAX UNIT
V
DD
/V
DDO
Supply voltage V
DDO
= V
DD
± 0.3 V 3 3.3 3.6 V
V
SS
Supply ground 0 0 0 V
PLLV
CCA
PLL supply voltage 3 3.3 3.6 V
V
CCA
¶
ADC supply voltage 3 3.3 3.6 V
V
CCP
Flash programming supply voltage
#
4.75 5 5.25 V
f
CLKOUT
Device clock frequency (system clock) 2 40 MHz
V
||
High level input voltage
All inputs
2
V 03
V
V
IH
||
High-level input voltage All inputs 2 V
DD
+ 0.3 V
V
Low level input voltage
All inputs
08
V
V
IL
Low-level input voltage All inputs 0.8 V
Output pins Group 1
k
− 2 mA
I
OH
High-level output source current, V
OH
= 2.4 V
Output pins Group 2
k
− 4 mA
I
OH
High level output source current, V
OH
2.4 V
Output pins Group 3
k
− 8 mA
Output pins Group 1
k
2 mA
I
OL
Low-level output sink current, V
OL
= V
OL
MAX
Output pins Group 2
k
4 mA
I
OL
Low level output sink current, V
OL
V
OL
MAX
Output pins Group 3
k
8 mA
T
Free air temperature
A version − 40 85
°C
T
A
Free-air temperature
S version
− 40 125
°C
T
J
Junction temperature − 40 25 150 °C
N
f
Flash endurance for the array (Write/erase cycles) − 40°C to 85°C 10K cycles
‡
See the mechanical data package page for thermal resistance values, Θ
JA
(junction-to-ambient), Θ
JC
(junction-to-case), and Ψjt (junction-to-top
of case)
§
The drive strengths of the EVA PWM pins and the EVB PWM pins are not identical.
¶
V
CCA
should not differ from V
DD
by more than 0.3 V.
#
For applications that involve millions of power cycles, it is recommended that V
CCP
be powered after V
DD
.
||
The input buffers used in 240x/240xA are not 5-V compatible.
kPrimary signals and their groupings:
Group 1: PWM1−PWM6, T1PWM, T2PWM, CAP1−CAP6, TCLKINA, IOPF6, IOPC1, TCK, TDI, TMS, XF, A0−A15, RS
Group 2: PS/DS/IS, RD, W/R, STRB, R/W, VIS_OE, D0−D15, T3PWM, T4PWM, PWM7−PWM12, CANTX, CANRX, SPICLK,
SPISOMI, SPISIMO, SPISTE
, EMU0, EMU1, TDO, TMS2
Group 3: TDIRA, TDIRB, SCIRXD, SCITXD, XINT1, XINT2, CLKOUT, TCLKINB