Datasheet
EMU0
EMU1
TRST
TMS
TDI
TDO
TCK
VDDIO
DSC
EMU0
EMU1
TRST
TMS
TDI
TDO
TCK
TCK_RET
13
14
2
1
3
7
11
9
6inchesorless
PD
GND
GND
GND
GND
GND
5
4
6
8
10
12
JTAGHeader
VDDIO
TMS320F28335, TMS320F28334, TMS320F28332
TMS320F28235, TMS320F28234, TMS320F28232
www.ti.com
SPRS439M –JUNE 2007–REVISED AUGUST 2012
6.5 Emulator Connection Without Signal Buffering for the DSP
Figure 6-3 shows the connection between the DSP and JTAG header for a single-processor configuration.
If the distance between the JTAG header and the DSP is greater than 6 inches, the emulation signals
must be buffered. If the distance is less than 6 inches, buffering is typically not needed. Figure 6-3 shows
the simpler, no-buffering situation. For the pullup/pulldown resistor values, see the pin description section.
For details on buffering JTAG signals and multiple processor connections, see TMS320F/C24x DSP
Controllers CPU and Instruction Set Reference Guide (literature number SPRU160).
Figure 6-3. Emulator Connection Without Signal Buffering for the DSP
Copyright © 2007–2012, Texas Instruments Incorporated Electrical Specifications 123
Submit Documentation Feedback
Product Folder Link(s): TMS320F28335 TMS320F28334 TMS320F28332 TMS320F28235 TMS320F28234
TMS320F28232