Datasheet

TMS320F28030, TMS320F28031, TMS320F28032
TMS320F28033, TMS320F28034, TMS320F28035
www.ti.com SPRS584J –APRIL 2009–REVISED OCTOBER 2013
6 Electrical Specifications
6.1 Absolute Maximum Ratings
(1) (2)
Supply voltage range, V
DDIO
(I/O and Flash) with respect to V
SS
–0.3 V to 4.6 V
Supply voltage range, V
DD
with respect to V
SS
–0.3 V to 2.5 V
Analog voltage range, V
DDA
with respect to V
SSA
–0.3 V to 4.6 V
Input voltage range, V
IN
(3.3 V) –0.3 V to 4.6 V
Output voltage range, V
O
–0.3 V to 4.6 V
Input clamp current, I
IK
(V
IN
< 0 or V
IN
> V
DDIO
)
(3)
±20 mA
Output clamp current, I
OK
(V
O
< 0 or V
O
> V
DDIO
) ±20 mA
Junction temperature range, T
J
(4)
–40°C to 150°C
Storage temperature range, T
stg
(4)
–65°C to 150°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Section 6.2 is not implied.
Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to V
SS
, unless otherwise noted.
(3) Continuous clamp current per pin is ± 2 mA.
(4) Long-term high-temperature storage and/or extended use at maximum temperature conditions may result in a reduction of overall device
life. For additional information, see IC Package Thermal Metrics Application Report (literature number SPRA953) and Reliability Data for
TMS320LF24xx and TMS320F28xx Devices Application Report (literature number SPRA963).
6.2 Recommended Operating Conditions
MIN NOM MAX UNIT
Device supply voltage, I/O, V
DDIO
(1)
2.97 3.3 3.63 V
Device supply voltage CPU, V
DD
(When internal 1.71 1.8 1.995
V
VREG is disabled and 1.8 V is supplied externally)
Supply ground, V
SS
0 V
Analog supply voltage, V
DDA
(1)
2.97 3.3 3.63 V
Analog ground, V
SSA
0 V
Device clock frequency (system clock) 2 60 MHz
High-level input voltage, V
IH
(3.3 V) 2 V
DDIO
+ 0.3 V
Low-level input voltage, V
IL
(3.3 V) V
SS
– 0.3 0.8 V
High-level output source current, V
OH
= V
OH(MIN)
, I
OH
All GPIO/AIO pins –4 mA
Group 2
(2)
–8 mA
Low-level output sink current, V
OL
= V
OL(MAX)
, I
OL
All GPIO/AIO pins 4 mA
Group 2
(2)
8 mA
Junction temperature, T
J
T version –40 105
°C
S version –40 125
Ambient temperature, T
A
Q version (Q100 qualification) –40 125
°C
Junction temperature, T
J
–40 150
(1) V
DDIO
and V
DDA
should be maintained within ~0.3 V of each other.
(2) Group 2 pins are as follows: GPIO16, GPIO17, GPIO18, GPIO19, GPIO28, GPIO29, GPIO36, GPIO37
Copyright © 2009–2013, Texas Instruments Incorporated Electrical Specifications 105
Submit Documentation Feedback
Product Folder Links: TMS320F28030 TMS320F28031 TMS320F28032 TMS320F28033 TMS320F28034
TMS320F28035