Datasheet
TMS320F28027, TMS320F28026, TMS320F28023, TMS320F28022
TMS320F28021, TMS320F28020, TMS320F280200
www.ti.com
SPRS523J –NOVEMBER 2008–REVISED OCTOBER 2013
Table 6-34. SPI Master Mode External Timing (Clock Phase = 1)
(1)(2)(3)(4)(5)
SPI WHEN (SPIBRR + 1) IS EVEN SPI WHEN (SPIBRR + 1) IS ODD
OR SPIBRR = 0 OR 2 AND SPIBRR > 3
NO. UNIT
MIN MAX MIN MAX
1 t
c(SPC)M
Cycle time, SPICLK 4t
c(LCO)
128t
c(LCO)
5t
c(LCO)
127t
c(LCO)
ns
2 t
w(SPCH)M
Pulse duration, SPICLK high 0.5t
c(SPC)M
– 10 0.5t
c(SPC)M
0.5t
c(SPC)M
– 0.5t
c (LCO)
– 10 0.5t
c(SPC)M
– 0.5t
c(LCO)
ns
(clock polarity = 0)
t
w(SPCL))M
Pulse duration, SPICLK low 0.5t
c(SPC)M
– 10 0.5t
c(SPC)M
0.5t
c(SPC)M
– 0.5t
c (LCO)
– 10 0.5t
c(SPC)M
– 0.5t
c(LCO
(clock polarity = 1)
3 t
w(SPCL)M
Pulse duration, SPICLK low 0.5t
c(SPC)M
– 10 0.5t
c(SPC)M
0.5t
c(SPC)M
+ 0.5t
c(LCO)
– 10 0.5t
c(SPC)M
+ 0.5t
c(LCO)
ns
(clock polarity = 0)
t
w(SPCH)M
Pulse duration, SPICLK high 0.5t
c(SPC)M
– 10 0.5t
c(SPC)M
0.5
tc(SPC)M
+ 0.5t
c(LCO)
– 10 0.5t
c(SPC)M
+ 0.5t
c(LCO)
(clock polarity = 1)
6 t
su(SIMO-SPCH)M
Setup time, SPISIMO data valid 0.5t
c(SPC)M
– 10 0.5t
c(SPC)M
– 10 ns
before SPICLK high
(clock polarity = 0)
t
su(SIMO-SPCL)M
Setup time, SPISIMO data valid 0.5t
c(SPC)M
– 10 0.5t
c(SPC)M
– 10
before SPICLK low
(clock polarity = 1)
7 t
v(SPCH-SIMO)M
Valid time, SPISIMO data valid after 0.5t
c(SPC)M
– 10 0.5t
c(SPC)M
– 10 ns
SPICLK high (clock polarity = 0)
t
v(SPCL-SIMO)M
Valid time, SPISIMO data valid after 0.5t
c(SPC)M
– 10 0.5t
c(SPC)M
– 10
SPICLK low (clock polarity = 1)
10 t
su(SOMI-SPCH)M
Setup time, SPISOMI before 26 26 ns
SPICLK high (clock polarity = 0)
t
su(SOMI-SPCL)M
Setup time, SPISOMI before 26 26
SPICLK low (clock polarity = 1)
11 t
v(SPCH-SOMI)M
Valid time, SPISOMI data valid after 0.25t
c(SPC)M
– 10 0.5t
c(SPC)M
– 10 ns
SPICLK high (clock polarity = 0)
t
v(SPCL-SOMI)M
Valid time, SPISOMI data valid after 0.25
tc(SPC)M
– 10 0.5
tc(SPC)M
– 10
SPICLK low (clock polarity = 1)
(1) The MASTER/SLAVE bit (SPICTL.2) is set and the CLOCK PHASE bit (SPICTL.3) is set.
(2) t
c(SPC)
= SPI clock cycle time = LSPCLK/4 or LSPCLK/(SPIBRR + 1)
(3) Internal clock prescalers must be adjusted such that the SPI clock speed is limited to the following SPI clock rate:
Master mode transmit 15-MHz MAX, master mode receive 10-MHz MAX
Slave mode transmit 10-MHz MAX, slave mode receive 10-MHz MAX.
(4) t
c(LCO)
= LSPCLK cycle time
(5) The active edge of the SPICLK signal referenced is controlled by the CLOCK POLARITY bit (SPICCR.6).
Copyright © 2008–2013, Texas Instruments Incorporated Electrical Specifications 107
Submit Documentation Feedback
Product Folder Links: TMS320F28027 TMS320F28026 TMS320F28023 TMS320F28022 TMS320F28021
TMS320F28020 TMS320F280200