Digital Media System-on-Chip (DMSoC) Product Preview

www.ti.com
PRODUCT PREVIEW
2.4.9 UART Interface
TMS320DM355
Digital Media System-on-Chip (DMSoC)
SPRS463A SEPTEMBER 2007 REVISED SEPTEMBER 2007
Table 2-14. ASP Terminal Functions (continued)
TERMINAL
TYPE
(1)
OTHER
(2) (3)
DESCRIPTION
NAME NO.
ASP0_CL
ASP0: Transmit Clock
KX / F18 I/O/Z V
DD
GIO: GIO[029]
GIO029
ASP0_DR
ASP0: Receive DataF
/ E18 I/O/Z V
DD
GIO: GIO[027]
GIO027
ASP0_DX
ASP0: Transmit Data
/ H15 I/O/Z V
DD
GIO: GIO[030]
GIO030
ASP0_FS
ASP0: Receive Frame Synch
R / F16 I/O/Z V
DD
GIO: GIO[025]
GIO025
ASP0_FS
X / G17 I/O/Z V
DD
ASP0: Transmit Frame SynchGIO: GIO[028]
GIO028
ASP1_CL
D18 I/O/Z V
DD
ASP1: Receive Clock
KR
ASP1_CL
D17 I/Z V
DD
ASP1: Master Clock
KS
ASP1_CL
D19 I/O/Z V
DD
ASP1: Transmit Clock
KX
ASP1_DR C19 I/O/Z V
DD
ASP1: Receive Data
ASP1_DX C18 I/O/Z V
DD
ASP1: Transmit Data
ASP1_FS
E17 I/O/Z V
DD
ASP1: Receive Frame Synch
R
ASP1_FS
E16 I/O/Z V
DD
ASP1: Transmit Frame Sync
X
The includes three UART ports. These ports are multiplexed with GIO and other signals.
Table 2-15. UART Terminal Functions
TERMINAL
TYPE
(1)
OTHER
(2) (3)
DESCRIPTION
NAME NO.
UART0_RXD U18 I V
DD
UART0: Receive data. Used for UART boot mode
UART0_TXD T18 O V
DD
UART0: Transmit data. Used for UART boot mode
UART1_RXD/ UART1: Receive data.
R15 I/O/Z V
DD
GIO013 GIO: GIO013
UART1_TXD/ UART1: Transmit data.
R17 I/O/Z V
DD
GIO012 GIO: GIO012
MMCSD1_DA
MMCSD1: DATA2
TA2/
A16 I/O/Z V
DD
GIO: GIO021
GIO021/
UART2: CTS
UART2_CTS
MMCSD1_DA
MMCSD1: DATA3
TA3/
B16 I/O/Z V
DD
GIO: GIO022
GIO022/
UART2: RTS
UART2_RTS
MMCSD1_DA
MMCSD1: DATA1
TA1/
B15 I/O/Z V
DD
GIO: GIO020
GIO020/
UART2: RXD
UART2_RXD
(1) I = Input, O = Output, Z = High impedance, S = Supply voltage, GND = Ground, A = Analog signal.
(2) Specifies the operating I/O supply voltage for each signal. See Section 5.3 , Power Supplies for more detail.
(3) PD = pull-down, PU = pull-up. (To pull up a signal to the opposite supply rail, a 1 k resistor should be used.)
Device Overview30 Submit Documentation Feedback