Interpolated Control (VIC) Port Reference Guide

Video Display Registers
4-77Video Display PortSPRU629
Table 4–20. Video Display Threshold Register (VDTHRLD) Field Descriptions
Description
Bit field
†
symval
†
Value
BT.656 and Y/C Mode
Raw Data Mode
31–26 Reserved – 0 Reserved. The reserved bit location is always read as 0. A
value written to this field has no effect.
25–16 VDTHRLD2 OF(value) 0–3FFh Field 2 threshold. Whenever
there are at least VDTHRLD
doublewords of space in the
Y display FIFO, a new Y
DMA event may be
generated. Whenever there
are at least ½ VDTHRLD
doublewords of space in the
Cb or Cr display FIFO, a
new Cb or Cr DMA event
may be generated.
Field 2 threshold. Whenever
there are at least VDTHRLD
doublewords of space in the
display FIFO, a new Y DMA
event may be generated.
15–12 INCPIX OF(value) 0–Fh Not used. FPCOUNT is incremented
every INCPIX output clocks.
11–10 Reserved – 0 Reserved. The reserved bit location is always read as 0. A
value written to this field has no effect.
9–0 VDTHRLD1 OF(value) 0–3FFh Field 1 threshold. Whenever
there are at least VDTHRLD
doublewords of space in the
Y display FIFO, a new Y
DMA event may be
generated. Whenever there
are at least ½ VDTHRLD
doublewords of space in the
Cb or Cr display FIFO, a
new Cb or Cr DMA event
may be generated.
Field 1 threshold. Whenever
there are at least VDTHRLD
doublewords of space in the
display FIFO, a new Y DMA
event may be generated.
†
For CSL implementation, use the notation VP_VDTHRLD_field_symval