Interpolated Control (VIC) Port Reference Guide

Video Display Registers
Video Display Port4-72 SPRU629
Table 4–16. Video Display Field 2 Image Offset Register (VDIMGOFF2)
Field Descriptions
Description
Bit field
†
symval
†
Value
BT.656 and Y/C Mode
Raw Data Mode
31 NV Negative vertical image offset enable bit.
NONE 0 Not used.
NEGOFF 1 Display image window
begins before the first active
line of field 2. (Used for VBI
data output.)
Not used.
30–28 Reserved – 0 Reserved. The reserved bit location is always read as 0. A
value written to this field has no effect.
27–16 IMGVOFF2 OF(value) 0–FFFh Specifies the display image vertical offset in lines from the
first active line of field 2.
15 NH Negative horizontal image offset.
NONE 0 Not used.
NEGOFF 1 Display image window
begins before the start of
active video. (Used for
HANC data output.)
Not used.
14–12 Reserved – 0 Reserved. The reserved bit location is always read as 0. A
value written to this field has no effect.
11–0 IMGHOFF2 OF(value) 0–FFFh Specifies the display image
horizontal offset in pixels
from the start of each line of
active video in field 2. This
must be an even number
(the LSB is treated as 0).
Specifies the display image
horizontal offset in pixels
from the start of each line of
active video in field 2.
†
For CSL implementation, use the notation VP_VDIMGOFF2_field_symval