Interpolated Control (VIC) Port Reference Guide

Video Display Registers
4-69Video Display PortSPRU629
Figure 4–47. Video Display Field 1 Image Offset Register (VDIMGOFF1)
31 30 28 27 16
NV
Reserved IMGVOFF1
R/W-0 R-0 R/W-0
15 14 12 11 0
NH
Reserved IMGHOFF1
R/W-0 R-0 R/W-0
Legend: R = Read only; R/W = Read/Write; -n = value after reset
Table 4–14. Video Display Field 1 Image Offset Register (VDIMGOFF1) Field Descriptions
Description
Bit field
†
symval
†
Value
BT.656 and Y/C Mode
Raw Data Mode
31 NV Negative vertical image offset enable bit.
NONE 0 Not used.
NEGOFF 1 Display image window
begins before the first active
line of field 1. (Used for VBI
data output.)
Not used.
30–28 Reserved – 0 Reserved. The reserved bit location is always read as 0. A
value written to this field has no effect.
27–16 IMGVOFF1 OF(value) 0–FFFh Specifies the display image vertical offset in lines from the
first active line of field 1.
15 NH Negative horizontal image offset.
NONE 0 Not used.
NEGOFF 1 Display image window
begins before the start of
active video. (Used for
HANC data output.)
Not used.
14–12 Reserved – 0 Reserved. The reserved bit location is always read as 0. A
value written to this field has no effect.
11–0 IMGHOFF1 OF(value) 0–FFFh Specifies the display image
horizontal offset in pixels
from the start of each line of
active video in field 1. This
must be an even number
(the LSB is treated as 0).
Specifies the display image
horizontal offset in pixels
from the start of each line of
active video in field 1.
†
For CSL implementation, use the notation VP_VDIMGOFF1_field_symval