Interpolated Control (VIC) Port Reference Guide

Video Display Registers
4-53Video Display PortSPRU629
Table 4–5. Video Display Control Registers (Continued)
Acronym SectionRegister Name
VDDEFVAL Video Display Default Display Value Register 4.12.24
VDVINT Video Display Vertical Interrupt Register 4.12.25
VDFBIT Video Display Field Bit Register 4.12.26
VDVBIT1 Video Display Field 1 Vertical Blanking Bit Register 4.12.27
VDVBIT2
Video Display Field 2 Vertical Blanking Bit Register 4.12.28
4.12.1 Video Display Status Register (VDSTAT)
The video display status register (VDSTAT) indicates the current display status
of the video port. The VDSTAT is shown in Figure 4–39 and described in
Table 4–6.
The VDXPOS and VDYPOS bits track the coordinates of the most-recently
displayed pixel. The F1D, F2D, and FRMD bits indicate the completion of fields
or frames and may need to be cleared by the DSP to prevent a DCNA interrupt
from being generated, depending on the selected frame operation. The F1D,
F2D, and FRMD bits are set when the final pixel from the appropriate field has
been sent to the output pad.
Figure 4–39. Video Display Status Register (VDSTAT)
31 30 29 28 27 16
—
FRMD F2D F1D VDYPOS
R-0 R/WC-0 R/WC-0 R/WC-0 R-0
15 14 13 12 11 0
Reserved
VBLNK VDFLD VDXPOS
R-0 R-0 R-0 R-0
Legend: R = Read only; WC = Write 1 to clear, write of 0 has no effect; -n = value after reset