Incor User's Guide Ethernet Media Access Controller TMS320C645x DSP

www.ti.com
5.22 Receive Unicast Enable Set Register (RXUNICASTSET)
EMAC Port Registers
Table 49. Receive Multicast/Broadcast/Promiscuous Channel Enable Register (RXMBPENABLE) Field
Descriptions (continued)
Bit Field Value Description
2-0 RXMULTCH 0-3h Receive multicast channel select
0 Select channel 0 to receive multicast frames
1h Select channel 1 to receive multicast frames
2h Select channel 2 to receive promiscuous frames
3h Select channel 3 to receive multicast frames
4h Select channel 4 to receive multicast frames
5h Select channel 5 to receive multicast frames
6h Select channel 6 to receive multicast frames
7h Select channel 7 to receive multicast frames
The receive unicast enable set register (RXUNICASTSET) is shown in Figure 50 and described in
Table 50 .
Figure 50. Receive Unicast Enable Set Register (RXUNICASTSET)
31 16
Reserved
R-0
15 8 7 6 5 4 3 2 1 0
Reserved RXCH7EN RXCH6EN RXCH5EN RXCH4EN RXCH3EN RXCH2EN RXCH1EN RXCH0EN
R-0 R/WS-0 R/WS-0 R/WS-0 R/WS-0 R/WS-0 R/WS-0 R/WS-0 R/WS-0
LEGEND: R = Read only; R/W = Read/Write; R/WS = Read/Write 1 to set; - n = value after reset
Table 50. Receive Unicast Enable Set Register (RXUNICASTSET) Field Descriptions
Bit Field Value Description
31-8 Reserved 0 Reserved
7 RXCH7EN Receive channel 7 unicast enable set bit. Write 1 to set the enable, a write of 0 has no effect. May
be read.
6 RXCH6EN Receive channel 6 unicast enable set bit. Write 1 to set the enable, a write of 0 has no effect. May
be read.
5 RXCH5EN Receive channel 5 unicast enable set bit. Write 1 to set the enable, a write of 0 has no effect. May
be read.
4 RXCH4EN Receive channel 4 unicast enable set bit. Write 1 to set the enable, a write of 0 has no effect. May
be read.
3 RXCH3EN Receive channel 3 unicast enable set bit. Write 1 to set the enable, a write of 0 has no effect. May
be read.
2 RXCH2EN Receive channel 2 unicast enable set bit. Write 1 to set the enable, a write of 0 has no effect. May
be read.
1 RXCH1EN Receive channel 1 unicast enable set bit. Write 1 to set the enable, a write of 0 has no effect. May
be read.
0 RXCH0EN Receive channel 0 unicast enable set bit. Write 1 to set the enable, a write of 0 has no effect. May
be read.
Ethernet Media Access Controller (EMAC)/Management Data Input/Output (MDIO)106 SPRU975B – August 2006
Submit Documentation Feedback