User's Manual

Registers www.ti.com
Figure 44. TCP2 Input Configuration Register 11 (TCPIC11)
31 18 17 0
Reserved TAIL6
R/W-0 R/W-0
LEGEND: R/W = Read/Write; R = Read only; - n = value after reset
Table 18. TCP2 Input Configuration Register 11 (TCPIC11) Field Descriptions
Bit Field Value Description
31-18 Reserved 0 Reserved. The reserved bit location is always read as 0. A value written to this field has
no effect.
17-0 TAIL6 0-FFFF FFFFh Tail bit. Values must be set as in the following list.
• CDMA-2000 Tail Symbol Pattern for Code Rate 1/5
tail+2 tail+1 tail+0
p21 p21 p21
• CDMA-2000 Tail Symbol Pattern for Code Rate 1/4
tail+2 tail+1 tail+0
p21 p21 p21
• CDMA-2000 Tail Symbol Pattern for Code Rate 1/3
tail+2 tail+1 tail+0
0 0 0
• CDMA-2000 Tail Symbol Pattern for Code Rate 1/5 or 1/4
tail+2 tail+1 tail+0
p21 p21 p21
• CDMA-2000 Tail Symbol Pattern for Code Rate 1/3, 1/2, or 3/4
tail+2 tail+1 tail+0
0 0 0
TMS320C6457 Turbo-Decoder Coprocessor 238 SPRUGK1 – March 2009
Submit Documentation Feedback