Computer Hardware User's Guide

Add Floating-Point Values ADDF
13-51 Assembly Language Instructions
Syntax ADDF src , dst
Operation dst + src → dst
Operands src general addressing modes (G):
0 0 register (R n , 0 ≤ n ≤ 7)
0 1 direct
1 0 indirect (disp = 0–255, IR0, IR1)
1 1 immediate
dst register (R n , 0 ≤ n ≤ 7)
Opcode
src
31 2423 16 8 7
0
15
00000 1 G
1
dst
0 0
Description The sum of the dst and src operands is loaded into the dst register. The dst and
src operands are assumed to be floating-point numbers.
Cycles 1
Status Bits These condition flags are modified only if the destination register is R7–R0.
LUF 1 if a floating-point underflow occurs; unchanged otherwise
LV 1 if a floating-point overflow occurs; unchanged otherwise
UF 1 if a floating-point underflow occurs; 0 otherwise
N 1 if a negative result is generated; 0 otherwise
Z 1 if a 0 result is generated; 0 otherwise
V 1 if a floating-point overflow occurs; 0 otherwise
C Unaffected
OVM Operation is not affected by OVM bit value.Mode Bit