Calculator User Manual

F-15 Glossary
MSTACK: See micro stack .
multiplier: A part of the CPU that performs 16-bit × 16-bit multiplication and
generates a 32-bit product. The multiplier operates using either signed
or unsigned 2s-complement arithmetic.
N
next AR: See next auxiliary register .
next auxiliary register: The register that will be pointed to by the auxiliary
register pointer (ARP) when an instruction that modifies ARP is finished
executing. See also
auxiliary register ; current auxiliary register .
NMI
: A hardware interrupt that uses the same logic as the maskable inter-
rupts but cannot be masked. It is often used as a soft reset. See also
maskable interrupt ; nonmaskable interrupt .
nonmaskable interrupt: An interrupt that can be neither masked by the in-
terrupt mask register (IMR) nor disabled by the INTM bit of status register
ST0.
NPAR:
Next program address register. Part of the program-address genera-
tion logic. This register provides the address of the next instruction to the
program counter (PC), the program address register (PAR), the micro
stack (MSTACK), or the stack.
O
OE: Receiver register overrun indicator bit . Bit 9 of the I/O status register
(IOSR); indicates whether overrun has occurred in the receiver of the
asynchronous serial port (that is, whether an unread character in the
ADTR has been overwritten by a new character).
operand: A value to be used or manipulated by an instruction; specified in
the instruction.
operand-fetch phase: The third phase of the pipeline; the phase in which
an operand or operands are fetched from memory. See also
pipeline ;
instruction-fetch phase ; instruction-decode phase; instruction-execute
phase
.
output shifter: 32- to 16-bit barrel left shifter. Shifts the 32-bit accumulator
output from 0 to 7 bits left for quantization management, and outputs ei-
ther the 16-bit high or low half of the shifted 32-bit data to the data write
bus (DWEB).
Glossary