Datasheet

TMS320C28346, TMS320C28345, TMS320C28344

TMS320C28343, TMS320C28342, TMS320C28341

SPRS516D –MARCH 2009–REVISED AUGUST 2012

www.ti.com

7 Revision History

This data sheet revision history highlights the technical changes made to the SPRS516C device-specific

data sheet to make it an SPRS516D revision.

Scope: See table below.

LOCATION ADDITIONS, DELETIONS, AND MODIFICATIONS

Section 1.2 Features:

• Added "Endianness: Little Endian" feature

Section 6.9 Power Sequencing:

• Changed "Additionally it is recommended that no voltage larger than a diode drop (0.7 V) should be applied to

any pin prior to powering up the device" to "No voltage larger than a diode drop (0.7 V) above V

DDIO

should be

applied to any digital pin (for analog pins, it is 0.7 V above V

DDA

) prior to powering up the device. Furthermore,

DDIO

and V

DDA

should always be within 0.3 V of each other."

Figure 6-10 General-Purpose Input Timing:

• Changed XCLKOUT to SYSCLK

Figure 6-14 PWM Hi-Z Characteristics:

• Changed XCLKOUT to SYSCLK

Table 6-25 Enhanced Quadrature Encoder Pulse (eQEP) Timing Requirements:

• Added footnote about limitations in the asynchronous mode

Submit Documentation Feedback

Product Folder Link(s): TMS320C28346, TMS320C28345, TMS320C28344 TMS320C28343, TMS320C28342,

TMS320C28341