Datasheet

EMU0
EMU1
TRST
TMS
TDI
TDO
TCK
VDDIO
MCU
EMU0
EMU1
TRST
TMS
TDI
TDO
TCK
TCK_RET
13
14
2
1
3
7
11
9
6inchesorless
PD
GND
GND
GND
GND
GND
5
4
6
8
10
12
JTAGHeader
VDDIO
TMS320C28346, TMS320C28345, TMS320C28344
TMS320C28343, TMS320C28342, TMS320C28341
www.ti.com
SPRS516D MARCH 2009REVISED AUGUST 2012
6.5 Thermal Design Considerations
Based on the end application design and operational profile, the I
DD
and I
DDIO
currents could vary.
Systems that exceed the recommended maximum power dissipation in the end product may require
additional thermal enhancements. Ambient temperature (T
A
) varies with the end application and product
design. The critical factor that affects reliability and functionality is T
J
, the junction temperature, not the
ambient temperature. Hence, care should be taken to keep T
J
within the specified limits. T
case
should be
measured to estimate the operating junction temperature T
J
. T
case
is normally measured at the center of
the package top-side surface. The thermal application reports IC Package Thermal Metrics (literature
number SPRA953) and Reliability Data for TMS320LF24xx and TMS320F28xx Devices (literature number
SPRA963) help to understand the thermal metrics and definitions.
6.6 Emulator Connection Without Signal Buffering for the MCU
Figure 6-2 shows the connection between the MCU and JTAG header for a single-processor configuration.
If the distance between the JTAG header and the MCU is greater than 6 inches, the emulation signals
must be buffered. If the distance is less than 6 inches, buffering is typically not needed. Figure 6-2 shows
the simpler, no-buffering situation. For the pullup/pulldown resistor values, see the pin description section.
For details on buffering JTAG signals and multiple processor connections, see TMS320F/C24x DSP
Controllers CPU and Instruction Set Reference Guide (literature number SPRU160).
Figure 6-2. Emulator Connection Without Signal Buffering for the MCU
Copyright © 2009–2012, Texas Instruments Incorporated Electrical Specifications 113
Submit Documentation Feedback
Product Folder Link(s): TMS320C28346, TMS320C28345, TMS320C28344 TMS320C28343, TMS320C28342,
TMS320C28341