Datasheet

TMS320C28346, TMS320C28345, TMS320C28344
TMS320C28343, TMS320C28342, TMS320C28341
www.ti.com SPRS516D –MARCH 2009–REVISED AUGUST 2012
SPRU608 TMS320C28x Instruction Set Simulator Technical Overview. This document describes
the simulator, available within the Code Composer Studio for TMS320C2000 IDE, that
simulates the instruction set of the C28x™ core.
SPRU625 TMS320C28x DSP/BIOS 5.32 Application Programming Interface (API) Reference
Guide. This document describes development using DSP/BIOS.
Application Reports and Software
Key Links Include:
1. C2000 Get Started - www.ti.com/c2000getstarted
2. C2000 Digital Motor Control Software Library - www.ti.com/c2000appsw
3. C2000 Digital Power Supply Software Library - www.ti.com/dpslib
4. DSP Power Management Reference Designs - www.ti.com/dsppower
SPRAAN9 C28x FPU Primer
provides an overview of the floating-point unit (FPU) in the TMS320F28335,
TMS320F28334, and TMS320F28332 Digital Signal Controller (DSC) devices.
SPRAAM0 Getting Started With TMS320C28x Digital Signal Controllers is organized by
development flow and functional areas to make your design effort as seamless as possible.
Tips on getting started with C28x™ DSP software and hardware development are provided
to aid in your initial design and debug efforts. Each section includes pointers to valuable
information including technical documentation, software, and tools for use in each phase of
design.
SPRA958 Running an Application from Internal Flash Memory on the TMS320F28xxx DSP covers
the requirements needed to properly configure application software for execution from on-
chip flash memory. Requirements for both DSP/BIOS™ and non-DSP/BIOS projects are
presented. Example code projects are included.
SPRAA85 Programming TMS320x28xx and 28xxx Peripherals in C/C++ explores a hardware
abstraction layer implementation to make C/C++ coding easier on 28x DSPs. This method is
compared to traditional #define macros and topics of code efficiency and special case
registers are also addressed.
SPRAA88 Using PWM Output as a Digital-to-Analog Converter on a TMS320F280x Digital Signal
Controller presents a method for utilizing the on-chip pulse width modulated (PWM) signal
generators on the TMS320F280x family of digital signal controllers as a digital-to-analog
converter (DAC).
SPRAA91 TMS320F280x Digital Signal Controller USB Connectivity Using the TUSB3410 USB-to-
UART Bridge Chip presents hardware connections as well as software preparation and
operation of the development system using a simple communication echo program.
SPRAAH1 Using the Enhanced Quadrature Encoder Pulse (eQEP) Module in TMS320x280x,
28xxx as a Dedicated Capture provides a guide for the use of the eQEP module as a
dedicated capture unit and is applicable to the TMS320x280x, 28xxx family of processors.
SPRAAI1 Using the ePWM Module for 0% – 100% Duty Cycle Control provides a guide for the use
of the ePWM module to provide 0% to 100% duty cycle control and is applicable to the
TMS320x280x family of processors.
SPRAAD5 Power Line Communication for Lighting Applications Using Binary Phase Shift Keying
(BPSK) with a Single DSP Controller presents a complete implementation of a power line
modem following CEA-709 protocol using a single DSP.
SPRAB26 TMS320x2833x/2823x to TMS320x2834x Delfino Migration Overview. This application
report describes differences between the Texas Instruments TMS320x2833x/2823x and the
TMS320x2834x devices to assist in application migration.
Copyright © 2009–2012, Texas Instruments Incorporated Device Support 105
Submit Documentation Feedback
Product Folder Link(s): TMS320C28346, TMS320C28345, TMS320C28344 TMS320C28343, TMS320C28342,
TMS320C28341