Datasheet

ABSOLUTE MAXIMUM RATINGS
TMP122-EP
SBOS454 – NOVEMBER 2008 .......................................................................................................................................................................................... www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
ORDERING INFORMATION
(1)
T
A
PACKAGE
(2)
ORDERABLE PART NUMBER TOP-SIDE MARKING
– 55 ° C to 125 ° C SOT23-6 Tape and reel of 250 TMP122AMDBVTEP 122E
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com .
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging .
over operating free-air temperature range (unless otherwise noted)
VALUE UNIT
V+ Power supply 7 V
V
I
Input voltage -0.3 to 7 V
Inout current 10 mA
Operating temperature range -55 to 150 ° C
Storage temperature range -60 to 150 ° C
T
J
(max) Junction temperature 150 ° C
Lead temperature (soldering) 300 ° C
PIN CONFIGURATION
2 Submit Documentation Feedback Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): TMP122-EP