Datasheet

RM46L450
RM46L850
SPNS184A –SEPTEMBER 2012–REVISED SEPTEMBER 2013 www.ti.com
4.8 Glitch Filters
A glitch filter is present on the following signals.
Table 4-20. Glitch Filter Timing Specifications
Pin Parameter MIN MAX Unit
nPORRST t
f(nPORRST)
475 2000 ns
Filter time nPORRST pin;
pulses less than MIN will be filtered out, pulses greater than
MAX will generate a reset
(1)
nRST t
f(nRST)
475 2000 ns
Filter time nRST pin;
pulses less than MIN will be filtered out, pulses greater than
MAX will generate a reset
TEST t
f(TEST)
475 2000 ns
Filter time TEST pin;
pulses less than MIN will be filtered out, pulses greater than
MAX will pass through
(1) The glitch filter design on the nPORRST signal is designed such that no size pulse will reset any part of the microcontroller (flash pump,
I/O pins, etc.) without also generating a valid reset signal to the CPU.
76 System Information and Electrical Specifications Copyright © 2012–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: RM46L450 RM46L850