Datasheet

RM46L450
RM46L850
SPNS184A –SEPTEMBER 2012–REVISED SEPTEMBER 2013 www.ti.com
2.3.2.7 Controller Area Network Controllers (DCAN)
Table 2-31. ZWT Controller Area Network Controllers (DCAN)
Terminal Signal Default Pull Type Description
Type Pull State
Signal Name 337
ZWT
CAN1RX B10 I/O Pull Up Programmable, CAN1 receive, or GPIO
20 µA
CAN1TX A10 CAN1 transmit, or GPIO
CAN2RX H1 CAN2 receive, or GPIO
CAN2TX H2 CAN2 transmit, or GPIO
CAN3RX M19 CAN3 receive, or GPIO
CAN3TX M18 CAN3 transmit, or GPIO
2.3.2.8 Local Interconnect Network Interface Module (LIN)
Table 2-32. ZWT Local Interconnect Network Interface Module (LIN)
Terminal Signal Default Pull Type Description
Type Pull State
Signal Name 337
ZWT
LINRX A7 I/O Pull Up Programmable, LIN receive, or GPIO
20 µA
LINTX B7 LIN transmit, or GPIO
2.3.2.9 Standard Serial Communication Interface (SCI)
Table 2-33. ZWT Standard Serial Communication Interface (SCI)
Terminal Signal Default Pull Type Description
Type Pull State
Signal Name 337
ZWT
N2HET1[06]/SCIRX/EPWM5A W3 I/O Pull Down Programmable, SCI receive, or GPIO
20 µA
N2HET1[13]/SCITX/EPWM5B N2 SCI transmit, or GPIO
32 Device Package and Terminal Functions Copyright © 2012–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: RM46L450 RM46L850