Datasheet

Getting Familiar With the Kit

www.ti.com

WARNING

This EVM is meant to be operated in a lab environment only and is

not considered by TI to be a finished end-product fit for general

consumer use.

This EVM must be used only by qualified engineers and

technicians familiar with risks associated with handling high

voltage electrical and mechanical components, systems and

subsystems.

This equipment operates at voltages and currents that can result in

electrical shock, fire hazard or personal injury if not properly

handled or applied. Equipment must be used with necessary

caution and appropriate safeguards employed to avoid personal

injury or property damage.

It is your responsibility to confirm that the voltages and isolation

requirements are identified and understood, prior to energizing the

board and or simulation. When energized, the EVM or components

connected to the EVM should not be touched.

Contents

1 Getting Familiar With the Kit ............................................................................................... 2

2 Hardware Overview ......................................................................................................... 3

3 Hardware Resource Mapping ............................................................................................. 8

List of Figures

1 TMDSHVRESLLCKIT Board Picture ..................................................................................... 1

2 Block Diagram for a DC/DC Power Conversion Application .......................................................... 3

3 TMDSHVRESLLCKIT Circuit Diagram................................................................................... 4

4 TMDSHVRESLLCKIT Macro Block Locations .......................................................................... 5

5 TMDSHVRESLLCKIT Circuit Diagram................................................................................... 9

6 TMDSHVRESLLCKIT Jumpers, Connectors, and Switches Locations ............................................ 10

List of Tables

1 Boot Options................................................................................................................. 7

2 PWM and ADC Resource Allocation ..................................................................................... 8

3 Description of Jumpers, Connectors, and Switches.................................................................... 9

1 Getting Familiar With the Kit

1.1 Kit Contents

The kit consists of:

• Half-bridge LLC resonant DC/DC converter with synchronous rectification board

• Piccolo™ F28027 controlCARD

• 12 V power adapter

• USB cable

• USB drive with GUI executable and Code Composer Studio™v4 software

High-Voltage Half-Bridge LLC Resonant DC/DC Converter With Synchronous SPRABS1–February 2013

Rectification Hardware Kit

Submit Documentation Feedback