Datasheet

F28M36P63C, F28M36P53C, F28M36H53C, F28M36H53B, F28M36H33C, F28M36H33B
www.ti.com SPRS825C –OCTOBER 2012–REVISED FEBRUARY 2014
Table 6-2. Current Consumption at 125-MHz C28x SYSCLKOUT and 125-MHz M3SSCLK (continued)
VREG ENABLED VREG DISABLED
MODE TEST CONDITIONS
(1)
I
DDIO
(2)
I
DDA
I
DD18
I
DD12
I
DDIO
(2)
I
DDA
TYP MAX TYP MAX TYP MAX TYP MAX TYP MAX TYP MAX
• PLL is on.
• Cortex-M3 CPU is not
executing.
• M3SSCLK is on.
SLEEP IDLE – 145 mA – 2 mA – 20 mA – 130 mA – 10 mA – 2 mA
• C28CLKIN is on.
• C28x CPU is not executing.
• C28CPUCLK is off.
• C28SYSCLK is on.
• PLL is on.
• Cortex-M3 CPU is not
executing.
• M3SSCLK is on.
SLEEP
– 125 mA – 2 mA – 20 mA – 120 mA – 10 mA – 2 mA
STANDBY
• C28CLKIN is off.
• C28x CPU is not executing.
• C28CPUCLK is off.
• C28SYSCLK is off.
• PLL is off.
• Cortex-M3 CPU is not
executing.
• M3SSCLK is 32 kHz.
DEEP SLEEP
– 75 mA – 2 mA – 5 mA – 60 mA – 6 mA – 2 mA
STANDBY
• C28CLKIN is off.
• C28x CPU is not executing.
• C28CPUCLK is off.
• C28SYSCLK is off.
NOTE
The peripheral-I/O multiplexing implemented in the device prevents all available peripherals
from being used at the same time because more than one peripheral function may share an
I/O pin. It is, however, possible to turn on the clocks to all the peripherals at the same time,
although such a configuration is not useful. If the clocks to all the peripherals are turned on
at the same time, the current drawn by the device will be more than the numbers specified in
the current consumption table.
Copyright © 2012–2014, Texas Instruments Incorporated Electrical Specifications 129
Submit Documentation Feedback
Product Folder Links: F28M36P63C F28M36P53C F28M36H53C F28M36H53B F28M36H33C F28M36H33B