Datasheet

TMDS361B
SLLS988A –SEPTEMBER 2009–REVISED JULY 2011 www.ti.com
Table 11. I
2
C Register 0x04 Lookup Table
BIT VALUE STATE DEFAULT DESCRIPTION
7 1 Clock A valid clock signal is detected on the selected port. If clock detect is disabled in register
detected 0x03, then bit 7 of register 0x04 is always 1.
0 No clock X The selected port does not have a valid clock signal.
detect
6:5 X RSVD Reserved
4 0 RSVD X This bit should always read 0
3:0 0 RSVD X Reserved
Register 0x04 is read-only.
Table 12. I
2
C Register 0x05 Lookup Table
BIT VALUE STATE DEFAULT DESCRIPTION
7:0 — RSVD X Reserved. Read-only, value is indeterministic.
Register 0x05 is TI internal use only.
Table 13. I
2
C Register 0x06 Lookup Table
BIT VALUE STATE DEFAULT DESCRIPTION
7:0 — RSVD X Reserved. Read-only, value is indeterministic.
Register 0x06 is TI internal use only.
Table 14. I
2
C Register 0x07 Lookup Table
BIT VALUE STATE DEFAULT DESCRIPTION
7:0 — RSVD X Reserved. Read-only, value is indeterministic.
Register 0x07 is TI internal use only.
SPACER
REVISION HISTORY
Changes from Original (September 2009) to Revision A Page
• Added Junction Temperature to the THERMAL CHARACTERISTICS table ....................................................................... 9
42 Copyright © 2009–2011, Texas Instruments Incorporated