Datasheet

Schematic

www.ti.com

1.2 Orderable Options

• TLV809KEVM-019: 3.3-V single channel supervisor with active low, push-pull RESET output

• TLV810SEVM-019: 3.3-V single channel supervisor with active high, push-pull RESET output

• TLV803SEVM-019: 3.3-V single channel supervisor with active low, open-drain RESET output

2 Schematic

Figure 1. TLV8xxxEVM Rev A Schematic

3 Setup and Board Description

3.1 EVM Input/Output Connectors and Test Jumpers

Connector Label Description

J1 VDD Input power supply connection: 2V to 6V

J2 GND Return connection for input power supply

J3 RESET RESET / RESET output of supervisor IC. Connect this output to a multimeter or oscilloscope to verify

RESET output voltage.

J4 GND Return connection for output (RESET / RESET)

JP1 Pull-Up Necessary for TLV803SEVM-019 only. Placing a jumper on JP1 connects the 49.9kΩ (R1) pull-up

resistor to VDD and RESET output.

TLV8xxxEVM-019 Evaluation Modules SLVU461– May 2011

Submit Documentation Feedback