Datasheet

EN
N/C
N/C
6
5
4
IN
GND
OUT
1
2
3
OUT
NC
IN
GND
EN
1
2
3
5
4
TLV712xx
www.ti.com
SBVS150A SEPTEMBER 2010REVISED JANUARY 2011
PIN CONFIGURATIONS
DBV PACKAGE
DSE PACKAGE
(1)
SOT23-5
SON-6
(TOP VIEW)
(TOP VIEW)
(1) Preview package option.
PIN DESCRIPTIONS
SOT23-5 SON-6
NAME DBV DSE DESCRIPTION
Input pin. A small 1-mF ceramic capacitor is recommended from this pin to ground to assure
IN 1 1 stability and good transient performance. See Input and Output Capacitor Requirements in the
Application Information section for more details.
GND 2 2 Ground pin
Enable pin. Driving EN over 0.9 V turns on the regulator. Driving EN below 0.4 V puts the
regulator into shutdown mode and reduces operating current to 1 mA, nominal.
EN 3 6
For TLV712xxP, output voltage is discharged through an internal 120-Ω resistor when device
is shut down.
NC 4 4, 5 No connection. This pin can be tied to ground to improve thermal dissipation.
Regulated output voltage pin. A small 1-mF ceramic capacitor is needed from this pin to
OUT 5 3 ground to assure stability. See Input and Output Capacitor Requirements in the Application
Information section for more details.
Copyright © 2010–2011, Texas Instruments Incorporated Submit Documentation Feedback 5