Datasheet

www.ti.com

Schematic and Bill of Materials

7.2 Bill of Materials

Table 2. TLV7101828EVM-595 Bill of Materials

Count RefDes Value Description Size Part Number MFR

3 C1-C3 1 µF Capacitor, Ceramic, 6.3V, X5R, 20% 603 STD STD

6 J1-J6 PEC02SAAN Header, 2-pin, 100mil spacing 0.100 inch x 2 PEC02SAAN Sullins

2 JP1, JP2 PEC03SAAN Header, 3-pin, 100mil spacing 0.100 inch x 3 PEC03SAAN Sullins

1 U1 TLV7101828DSE IC, Dual 200mA, LDO Regulator SON-6 TLV7101828DSE TI

1 N/A PCB, FR-4, 2-Layer, SMOBC,1.052 in. x HPA595 TI

1.290 in. x 0.062 in.

2 N/A Shunt, Open-top 151-8000 Kobiconn

Notes: 1. These assemblies are ESD sensitive, ESD precautions shall be observed.

2. 2. These assemblies must be clean and free from flux and all contaminants.

Use of no clean flux is not acceptable.

3. These assemblies must comply with workmanship standards IPC-A-610 Class 2.

4. Ref designators marked with an asterisk ('**') cannot be substituted.

All other components can be substituted with equivalent MFG's components.

5. Do not separate PCB

SLVU404–September 2010 TLV7101828EVM-595

Submit Documentation Feedback