Datasheet

OUT GND
IN EN
4
1
3
2
Thermal
Pad
TLV707 Series
www.ti.com SBVS153C –FEBRUARY 2011–REVISED NOVEMBER 2012
PIN CONFIGURATIONS
DQN PACKAGE
DFN-4
(TOP VIEW)
PIN DESCRIPTIONS
PIN
NAME NO. DESCRIPTION
Regulated output voltage pin. A small 1μF ceramic capacitor is needed from this pin to ground to assure
OUT 1 stability. See Input and Output Capacitor Requirements in the Application Information section for more
details.
GND 2 Ground pin
Enable pin. Driving EN over 0.9 V turns on the regulator. Driving EN below 0.4 V puts the regulator into
EN 3 shutdown mode
For TLV707xxP, output voltage is discharged through an internal 120-Ω resistor when device is shut down.
Input pin. A small 1µF ceramic capacitor is recommended from this pin to ground for good transient
IN 4 performance. See Input and Output Capacitor Requirements in the Application Information section for more
details.
NC — No connection. This pin can be tied to ground to improve thermal dissipation.
Copyright © 2011–2012, Texas Instruments Incorporated Submit Documentation Feedback 5