Datasheet

www.ti.com

Schematic and Bill of Materials

7.2 Bill of Materials

Table 2. TLV70728EVM-612 Bill of Materials

-001 RefDes Value Description Size Part Number MFR

2 C1, C2 1.0 µF Capacitor, Ceramic, Low Inductance, 0603 Std Murata

6.3V, X7R, 10%

4 J1, J2, J3, J4 PEC02SAAN Header, 2-pin, 100mil spacing 0.100 inch x 2 PEC02SAAN Sullins

1 JP1 PEC03SAAN Header, 3-pin, 100mil spacing 0.100 inch x 3 PEC03SAAN Sullins

1 U2 TLV70728DQN IC, 150mA, Low IQ, LDO Regulator DQN TLV70728DQN TI

1 Label 1.25 x 0.25 inch THT-13-457-10 Brady

1 – Shunt, 100-mil, Black 0.100 929950-00 3M

1 – PCB, 1.070 In x1.660 In x 0.062 In – PCB Any

Notes: 1. These assemblies are ESD sensitive, ESD precautions shall be observed.

2. These assemblies must be clean and free from flux and all contaminants.

Use of no clean flux is not acceptable.

3. These assemblies must comply with workmanship standards IPC-A-610 Class 2.

Ref designators marked with an asterisk ('**') cannot be substituted.

4. All other components can be substituted with equivalent MFG's components.

5. Install label after final wash. Text shall be 8 pt font. Text shall be per Table 1 below.

Table 1

Assembly number Text

HPA612-001 TLV70728EVM-612

SLVU416–December 2010 TPS70728EVM-612

Submit Documentation Feedback