Datasheet

www.ti.com
Bill of Materials
8 Bill of Materials
This section provides the TLV70433DBVEVM-712 and the TLV70433PKEVM-712 bill of materials.
Table 1. TLV70433DBVEVM-712, TLV70433PKEVM-712 Bill of Materials
(1)(2)(3)(4)
Count
-001 -002 RefDes Value Description Size Part Number MFR
2 2 C1, C2 1.0 mF Capacitor, ceramic 0805 STD muRata
5 5 J1, J2, J3, PTC36SAAN Header, 2-pin, 100-mil spacing 0.100 inch x 2 STD Sullins
J4, J5
1 0 R1 0 Resistor, chip, 1/16W, 1% 0603 PTC36SAAN Vishay
0 1 R2 0 Resistor, chip, 1/16W, 1% 0603 PTC36SAAN Vishay
1 1 U1 TLV70433PK IC, 24-V input, 150-mA, Ultraow IQ, LDO SOT-89 TLV70433PK TI
Regulator
0 0 U2 TLV70433DBV IC, 24-V input, 150-mA, Ultraow IQ, LDO SOT-23 TLV70433DBV TI
Regulator
1 1 PCB, 1.260In x 1.845 In x 0.062 In HPA712 Any
0 0 Shunt, 100-mil, black 0.100 929950-00 3M
1 1 Label (see
(5)
) 1.25 x 0.25 inch THT-13-457-10 Brady
(1)
These assemblies are ESD sensitive. ESD precautions must be observed.
(2)
These assemblies must be clean and free from flux and all contaminants. Use of no-clean flux is not acceptable.
(3)
These assemblies must comply with IPC-A-610 Class 2 workmanship standards.
(4)
Ref designators marked with an asterisk (***) cannot be substituted. All other components can be substituted with equivalent
components.
(5)
Install label after final wash. Text should be 8-point font, and correspond to the text shown in Table 2.
Table 2. Assembly Marking
Assembly No Text
HPA712A-001 TLV0433PKEVM-712
HPA712A-002 TLV0433DBVEVM-712
9
SBVU017January 2011 TLV70433DBVEVM-712, TLV70433PKEVM-712 Evaluation Modules
Submit Documentation Feedback
© 2011, Texas Instruments Incorporated