Datasheet

Bill of Materials

www.ti.com

7 Bill of Materials

Table 2 presents the bill of materials for the TLV61220 evaluation module.

Table 2. Bill of Materials

Count RefDes Value Description Size Part Number MFR

2 C1-2 10uF Capacitor, Ceramic, 6.3V, X5R, 20% 0603 Std Std

1 L1 4.7uH Inductor, SMT Power 2.2 A 0.080 x 0.080 inch EPL3010-472ML Coilcraft

2 R1,R3 1.00M Resistor, Chip, 1/16W, 1% 0603 Std Std

1 R2 178k Resistor, Chip, 1/16W, 1% 0603 Std Std

1 U1 TLV61220DBV IC, High Efficient, Tiny 1 Cell Li-Ion or 1-3 Cells DBV-6 TLV61220DBV TI

Alk/NiCd/NiMH Boost Converter

Notes: 1. These assemblies are ESD sensitive, ESD precautions shall be observed.

2. These assemblies must be clean and free from flux and all contaminants. Use of unclean flux is unacceptable.

3. These assemblies must comply with workmanship standards IPC-A-610 Class 2.

4. Reference designators are marked with an asterisk ('**') cannot be substituted. All other components can be substituted with equivalent MFG's

components.

TLV61220EVM-120, Low-Input Voltage, Step-Up Converter Evaluation SLVU671–February 2012

Module

Submit Documentation Feedback