Datasheet

www.ti.com
6.9.2 Register Data Tab
Kit Operation
The third menu item is a submenu of Recently Opened Files. This is a list of script files that have
previously been opened, allowing fast access to commonly-used script files. The final menu item is Exit,
which terminates the TLV320DAC32EVM software.
Figure 16. File Menu
Under the Help menu is an About... menu item which displays information about the TLV320DAC32EVM
software.
The actual USB protocol used as well as instructions on writing scripts are detailed in Section C.1 . While it
is not necessary to understand or use either the protocol or the scripts directly, understanding them may
be helpful to some users.
The Register Data Tab contains two tabs labeled Page 0 Registers and Page 1 Registers. Each tab
contains the current register settings of the codec in table format (see Figure 17 ).
The first three columns contain the register number and name information. The register number is
displayed in decimal format in the first column and hexadecimal format in the second column. The third
column contains the name of the register. Reserved registers are highlighted gray and should not be read
or written. The remaining columns display the register data in hexadecimal format and in binary format
with bit D7 being the MSB.
The Register Dump to File button allows both pages of the register information to be saved as Excel
files. Each page is saved as a separate file. The user is prompted for the name and location of the files to
be saved.
SLAU201 – November 2006 TLV320DAC32EVM and TLV320DAC32EVM-PDK 23
Submit Documentation Feedback