Datasheet

www.ti.com
6.7.3 EQ Filters
Kit Operation
To use these filters, enter the gain desired and the corner frequency. Choose the mode to use ( Bass or
Treble); the response will be plotted on the Effect Filter Response graph.
EQ, or parametric, filters can be designed on this tab (see Figure 7 ). Enter a gain, bandwidth, and a
center frequency (Fc). Either bandpass (positive gain) or band-reject (negative gain) filters can be created
Figure 7. EQ Filters
SLAU201 – November 2006 TLV320DAC32EVM and TLV320DAC32EVM-PDK 15
Submit Documentation Feedback