Datasheet

Appendix D

www.ti.com

Table 7. TLV320DAC3203EVM Bill of Materials (continued)

MISCELLANEOUS ITEMS

Used Value Ref Des Description Vendor Part number

1 S2 Light touch switch, 6 mm × 3.5 mm, 240 gf, SMD Panasonic EVQ-5PN04K

1 SW1 Switch slide, 4PDT, 30 V, rt angle E-Switch EG4208

2 P12, P22 20 pin SMT plug header Samtec TSM-110-01-L-DV-P

4 J11, J12, J21, J22 20 pin SMT socket header Samtec SSW-110-22-F-D-VS-K

1 P23 10 Pin SMT plug header Samtec TSM-105-01-L-DV-P

1 J23 10 pin SMT socket header Samtec SSW-105-22-F-D-VS-K

1 J2 Jack audio mini (3.5 mm) 4-COND PCB-RA, RoHS CUI Inc. SJ-43516-SMT

2 do not J3, J4 3.5 mm audio jack, T-R-S, SMD CUI Inc. SJ1-3515-SMT

install J4

2 do not J1, J5 Screw terminal block, 3 position On Shore ED555/3DS

install J5 Technology

2 J6, J7 Screw terminal block, 4 position On Shore ED555/4DS

Technology

12 not installed TP1, TP2, TP3, TP4, TP5, TEST POINT PC MINI 0.040"D RED Keystone 5000

TP11, TP12, TP13, TP14, Electronics

TP15, TP16, TP17

24 not installed TP18, TP19, TP20, TP21, TEST POINT PC MINI 0.040"D WHITE Keystone 5002

TP22, TP23, TP24, TP25, Electronics

TP26, TP27, TP28, TP29,

TP30, TP31, TP32, TP33,

TP34, TP35, TP36, TP37,

TP38, TP39, TP40, TP41

5 TP6, TP7, TP8, TP9, TP10 TEST POINT PC MULTI PURPOSE BLK Keystone 5011

Electronics

12 W3, W4, W5, W6, W7, 2-pin thru-hole plug header (Jumper), 0.1" spacing Samtec TSW-102-07-L-S

W8, W9, W10, W11, W12,

W13, W15

3 W1, W2, W4 3 position jumper, 0.1" spacing Samtec TSW-103-07-L-S

Installed per Installed per test Header shorting block Samtec SNT-100-BK-T

test procedure

procedure

ATTENTION:

Alternate Resistor and Capacitor vendors may be used. In this case substitutions must have like descriptions.

All components should be RoHS compliant. Some part numbers may be either leaded or RoHS. Verify purchased components are RoHS compliant.

TLV320DAC3203EVM Bill of Materials SLAU441–April 2012

Submit Documentation Feedback