Datasheet

www.ti.com
4.9.3.6 3D Effect
TLV320AIC34EVM Software
The 3D effect is described in the TLV320AIC34 data sheet. It uses the two biquad sections differently than
most other effect filter settings. To use this effect properly, make sure the appropriate coefficients are
already loaded into the two biquad sections. The User Filters tab may be used to load the coefficients.
See Figure 23 .
Figure 23. 3D Effect Settings
To enable the 3D effect, check the 3D Effect On box. The Depth knob controls the value of the 3D
Attenuation Coefficient.
TLV320AIC34EVM-K 28 SLAU232 – December 2007
Submit Documentation Feedback