Datasheet

TLV320AIC33
www.ti.com ........................................................................................................................................... SLAS480B – JANUARY 2006 – REVISED DECEMBER 2008
ELECTRICAL CHARACTERISTICS (continued)
At 25 ° C, AVDD, DRVDD, IOVDD = 3.3 V, DVDD = 1.8 V, Fs = 48-kHz, 16-bit audio data (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
MICROPHONE BIAS
2.0
2.25 2.5 2.75
Bias voltage Programmable settings, load = 750 Ω V
AVDD-
0.2
Current sourcing 2.5 V setting 4 mA
AUDIO DAC Differential Line output, load = 10 k Ω , 50 pF
1.414 V
RMS
Full-scale differential output 0-dB gain to line outputs. DAC output common-mode
voltage setting = 1.35 V, output level control gain = 0-dB
4.0 V
PP
Signal-to-noise ratio, Fs = 48 kHz, 0-dB gain to line outputs, zero signal
90 100 dB
A-weighted
(3)
applied, referenced to full-scale input level
Fs = 48 kHz, 0-dB gain to line outputs,
Dynamic range, A-weighted 100 dB
1 kHz – 60 dB signal applied
Total harmonic distortion Fs = 48 kHz, 1 kHz 0 dB input signal applied – 93 – 75 dB
Power supply rejection ratio 234 Hz, 100 mVpp on AVDD, DRVDD1/2 81 dB
DAC channel separation (left to
1-kHz, 0-dB – 100 dB
right)
DAC interchannel gain mismatch 1 kHz input, 0dB gain 0.1 dB
DAC Gain Error 1 kHz input, 0dB gain – 0.4 dB
DAC DIGITAL INTERPOLATION
Fs = 48-kHz
FILTER
Passband High-pass filter disabled 0.45 × Fs Hz
Passband ripple High-pass filter disabled ± 0.06 dB
Transition band 0.45 × Fs 0.55 × Fs Hz
Stopband 0.55 × Fs 7.5 × Fs Hz
Stopband attenuation 65 dB
Group delay 21/Fs Sec
STEREO HEADPHONE DRIVER AC-coupled output configuration
(3)
0-dB gain to high power outputs. Output
0-dB full-scale output voltage 0.707 V
RMS
common-mode voltage setting = 1.35 V
First option 1.35
Programmable output common
Second option 1.50
mode voltage (applicable to Line V
Third option 1.65
Outputs also)
Fourth option 1.8
Maximum programmable output
9 dB
level control gain
Programmable output level
1 dB
control gain step size
R
L
= 32 Ω 15
P
O
Maximum output power mW
R
L
= 16 Ω 30
Signal-to-noise ratio,
94 dB
A-weighted
(4)
(3) Unless otherwise noted, all measurements use output common-mode voltage setting of 1.35 V, 0-dB output level control gain, 16- Ω
single-ended load.
(4) Ratio of output level with a 1-kHz full-scale input, to the output level playing an all-zero signal, measured A-weighted over a 20-Hz to
20-kHz bandwidth.
Copyright © 2006 – 2008, Texas Instruments Incorporated Submit Documentation Feedback 7
Product Folder Link(s): TLV320AIC33