Datasheet

www.ti.com
3 Digital Interface
Digital Interface
In addition to the analog headers, the analog inputs and outputs may also be accessed through alternate
connectors, either screw terminals or audio jacks. The stereo microphone input is also tied to J8 and the
stereo headphone output (the HP set of outputs) is available at J9.
Table 2 summarizes the screw terminals available on the TLV320AIC32EVM.
Table 2. Alternate Analog Connectors
DESIGNATOR PIN 1 PIN 2 PIN3
J6 AGND LINE1R LINE1L
J7 MIC3L MIC3R AGND
J10 (+) LEFT_LOP (-) LEFT_LOM
J11 (+) RIGHT_LOP (-) RIGHT_LOM
J12 (+) HPLOUT (-) HPLCOM AGND
J13 (+) HPROUT (-) HPRCOM AGND
J14 AGND LINE2R LINE2L
The TLV320AIC32EVM is designed to easily interface with multiple control platforms. Samtec part
numbers SSW-110-22-F-D-VS-K and TSM-110-01-T-DV-P provide a convenient 10-pin dual row
header/socket combination at J4 and J5. These headers/sockets provide access to the digital control and
serial data pins of the device. Consult Samtec at www.samtec.com or call 1-800- SAMTEC-9 for a variety
of mating connector options. Table 3 summarizes the digital interface pinout for the TLV320AIC32EVM.
Table 3. Digital Interface Pinout
PIN NUMBER SIGNAL DESCRIPTION
J4.1 NC Not Connected
J4.2 NC Not Connected
J4.3 NC Not Connected
J4.4 DGND Digital Ground
J4.5 NC Not Connected
J4.6 NC Not Connected
J4.7 NC Not Connected
J4.8 RESET INPUT Reset signal input to AIC32EVM
J4.9 NC Not Connected
J4.10 DGND Digital Ground
J4.11 NC Not Connected
J4.12 NC Not Connected
J4.13 NC Not Connected
J4.14 AIC32 /RESET Reset
J4.15 NC Not Connected
J4.16 SCL I
2
C Serial Clock
J4.17 NC Not Connected
J4.18 DGND Digital Ground
J4.19 NC Not Connected
J4.20 SDA I
2
C Serial Data Input/Output
J5.1 NC Not Connected
J5.2 NC Not Connected
J5.3 BCLK Audio Serial Data Bus Bit Clock (Input/Output)
J5.4 DGND Digital Ground
TLV320AIC32EVM and TLV320AIC32EVM-PDK User's Guide4 SBAU113 – November 2005