Datasheet

EVM Description and Getting Started

www.ti.com

2.2 Getting Started

Evaluation can start right out of the box:

1. Install jumpers for TLV320AIC3212EVM-U (see Section 7 for default jumper settings)

2. Download and install the TLV320AIC3212EVM-U Control Software from the EVM product folder. The

password for installation is "CC".

3. Connect the TLV320AIC3212EVM to an available USB port. LED lights D1 and D2 should illuminate

once the EVM is detected by PC. Also in the Windows device manager, the EVM should be recognized

as “USB Composite Device”.

Figure 2. USB Connection

4. Connect stereo headphones at the headphone output (J4)

TLV320AIC3212EVM-U Evaluation Module SLAU435–March 2012

Submit Documentation Feedback