Datasheet

2.6.2 Command Dialog
EVM + PC www.ti.com
Open the command dialog (View->Command … ) to write, edit, load, save and run command scripts.
Command scripts are text files that contain commands to communicate with the TLV320AIC3111. The
syntax is described in Figure 4 .
Figure 4. Command Dialog
• The main area of the command dialog is command buffer (editable text) which contains the command
script. To run the command script, click the Run button.
• The smaller read only text area on the right side of the command dialog displays control data read
from the TLV320AIC3111. The Clear button clears the Read Data field.
• The one line text edit field on the left bottom allows single command execution.
• The Record check box enables recording of commands generated by the control software.
Figure 4 shows a recording of the volume control for the left Class-A/B HP Driver amplifier (note that the
Record checkbox is checked).
A single command to read four bytes starting at address 0x28 was executed and the result is displayed in
the Read Data field.
TLV320AIC3111 EVM8 SLAU285 – July 2009
Submit Documentation Feedback